Synergistic Porosity and Charge Effects in a Supramolecular Porphyrin Cage Promote Efficient Photocatalytic CO2 Reduction**

We present a supramolecular approach to catalyzing photochemical CO₂ reduction through second-sphere porosity and charge effects. An iron porphyrin box ( PB ) bearing 24 cationic groups, FePB-2(P) , was made via post-synthetic modification of an alkyne-functionalized supramolecular synthon. FePB-2(P) promotes the photochemical CO₂ reduction reaction (CO₂RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOF_max) reaching 1400 min⁻¹. The cooperativity between porosity and charge results in a 41-fold increase in activity relative to the parent Fe tetraphenylporphyrin ( FeTPP ) catalyst, which is far greater than analogs that augment catalysis through porosity ( FePB-3(N ), 4-fold increase) or charge (Fe p-tetramethylanilinium porphyrin ( Fe-p-TMA ), 6-fold increase) alone. This work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces.     

Oxidation-Reduction Molecular Junction Covalent Organic Frameworks for Full Reaction Photosynthesis of H2O2

The full reaction photosynthesis of H₂O₂ that can combine water-oxidation and oxygen-reduction without sacrificial agents is highly demanded to maximize the light-utilization and overcome the complex reaction-process of anthraquinone-oxidation. Here, a kind of oxidation-reduction molecular junction covalent-organic-framework (TTF-BT-COF) has been synthesized through the covalent-coupling of tetrathiafulvalene (photo-oxidation site) and benzothiazole (photo-reduction site), which presents visible-light-adsorption region, effective electron-hole separation-efficiency and photo-redox sites that enables full reaction generation of H₂O₂. Specifically, a record-high yield (TTF-BT-COF, ≈276 000 μM h⁻¹ g⁻¹) for H₂O₂ photosynthesis without sacrificial agents has been achieved among porous crystalline photocatalysts. This is the first work that can design oxidation-reduction molecular junction COFs for full reaction photosynthesis of H₂O₂, which might extend the scope of COFs in H₂O₂ production.     

Spatially Directed Pyrolysis via Thermally Morphing Surface Adducts

Combustion is often difficult to spatially direct or tune associated kinetics—hence a run-away reaction. Coupling pyrolytic chemical transformation to mass transport and reaction rates (Damköhler number), however, we spatially directed ignition with concomitant switch from combustion to pyrolysis (low oxidant). A ‘surface-then-core’ order in ignition, with concomitant change in burning rate,is therefore established. Herein, alkysilanes grafted onto cellulose fibers are pyrolyzed into non-flammable SiO₂ terminating surface ignition propagation, hence stalling flame propagating. Sustaining high temperatures, however, triggers ignition in the bulk of the fibers but under restricted gas flow (oxidant and/or waste) hence significantly low rate of ignition propagation and pyrolysis compared to open flame (Liñán's equation). This leads to inside-out thermal degradation and, with felicitous choice of conditions, formation of graphitic tubes. Given the temperature dependence, imbibing fibers with an exothermically oxidizing synthon (MnCl₂) or a heat sink (KCl) abets or inhibits pyrolysis leading to tuneable wall thickness. We apply this approach to create magnetic, paramagnetic, or oxide containing carbon fibers. Given the surface sensitivity, we illustrate fabrication of nm- and μm-diameter tubes from appropriately sized fibers.     

Ultralow-loss Optical Waveguides through Balancing Deep-Blue TADF and Orange Room Temperature Phosphorescence in Hybrid Antimony Halide Microstructures

Harnessing the potential of thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) is crucial for developing light-emitting diodes (LEDs), lasers, sensors, and many others. However, effective strategies in this domain are still relatively scarce. This study presents a new approach to achieving highly efficient deep-blue TADF (with a PLQY of 25 %) and low-energy orange RTP (with a PLQY of 90 %) through the fabrication of lead-free hybrid halides. This new class of monomeric and dimeric 0D antimony halides can be facilely synthesized using a bottom-up solution process, requiring only a few seconds to minutes, which offer exceptional stability and nontoxicity. By leveraging the highly adaptable molecular arrangement and crystal packing modes, the hybrid antimony halides demonstrate the ability to self-assemble into regular 1D microrod and 2D microplate morphologies. This self-assembly is facilitated by multiple non-covalent interactions between the inorganic cores and organic shells. Notably, these microstructures exhibit outstanding polarized luminescence and function as low-dimensional optical waveguides with remarkably low optical-loss coefficients. Therefore, this work not only presents a pioneering demonstration of deep-blue TADF in hybrid antimony halides, but also introduces 1D and 2D micro/nanostructures that hold promising potential for applications in white LEDs and low-dimensional photonic systems.     

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9S8/Co3S4/Cu2S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co₉S₈/Co₃S₄/Cu₂S nanoparticle in which Co₃S₄ germinates between Co₉S₈ and Cu₂S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co₉S₈ and Cu₂S tends to trigger the interface phase transition of Co₉S₈, leading to Co₃S₄ interlayer due to the low formation energy of Co₃S₄/Cu₂S (−7.61 eV) than Co₉S₈/Cu₂S (−5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×10¹⁴ to 2.09×10¹⁵ cm⁻³), and creates more active sites. Compared to Co₉S₈ and Cu₂S, the Co₉S₈/Co₃S₄/Cu₂S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co₉S₈/Co₃S₄/Cu₂S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm⁻² under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.     

Increasing Reduction Potentials of Type 1 Copper Center and Catalytic Efficiency of Small Laccase from Streptomyces coelicolor through Secondary Coordination Sphere Mutations

The key to type 1 copper (T1Cu) function lies in the fine tuning of the Cu^II/I reduction potential (E°′_T1Cu) to match those of its redox partners, enabling efficient electron transfer in a wide range of biological systems. While the secondary coordination sphere (SCS) effects have been used to tune E°′_T1Cu in azurin over a wide range, these principles are yet to be generalized to other T1Cu-containing proteins to tune catalytic properties. To this end, we have examined the effects of Y229F, V290N and S292F mutations around the T1Cu of small laccase (SLAC) from Streptomyces coelicolor to match the high E°′_T1Cu of fungal laccases. Using ultraviolet-visible absorption and electron paramagnetic resonance spectroscopies, together with X-ray crystallography and redox titrations, we have probed the influence of SCS mutations on the T1Cu and corresponding E°′_T1Cu. While minimal and small E°′_T1Cu increases are observed in Y229F- and S292F-SLAC, the V290N mutant exhibits a major E°′_T1Cu increase. Moreover, the influence of these mutations on E°′_T1Cu is additive, culminating in a triple mutant Y229F/V290N/S292F-SLAC with the highest E°′_T1Cu of 556 mV vs. SHE reported to date. Further activity assays indicate that all mutants retain oxygen reduction reaction activity, and display improved catalytic efficiencies (k_cat/K_M) relative to WT-SLAC.     

An Isolable Radical Anion Featuring a 2-Center-3-Electron π-Bond without a Clearly Defined σ-Bond

Featuring an extra electron in the π* antibonding orbital, species with a 2-center-3-electron (2c3e) π bond without an underlying σ bond are scarcely known. Herein, we report the synthesis, isolation and characterization of a radical anion salt [K(18-C-6)]⁺{[(HCNDipp)₂Si]₂P₂}⋅⁻ (i.e. [K(18-C-6)]⁺ 3 ⋅⁻) (18-C-6=18-crown-6, Dipp=2,6-diisopropylphenyl), in which 3 ⋅⁻ features a perfectly planar Si₂P₂ four-membered ring. This species represents the first example of a Si- and P-containing analog of a bicyclo[1.1.0]butane radical anion. The unusual bonding motif of 3 ⋅⁻ was thoroughly investigated via X-ray diffraction crystallography, electron paramagnetic resonance spectroscopy (EPR), and calculations by density functional theory (DFT), which collectively unveiled the existence of a 2c3e π bond between the bridgehead P atoms and no clearly defined supporting P−P σ bond.     

Lattice Distortion and H-passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two-electron Oxygen Reduction to H2O2

The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e⁻ ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e⁻ ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H₂O₂ production. The work here gives not only new understandings on the 2e⁻ ORR catalysis, but also the robust catalyst which can be directly used in industry.     

Elution–extrusion counter-current chromatographic separation and theoretical mechanism of antioxidant from Robinia pseudoacacia flower

Robinia pseudoacacia flowers have attracted much attention because of numerous bioactivities. In this study, its extract showed the potential scavenging ability for 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) and 1,1-diphenyl-2-picrylhydrazyl free radicals. Under the guidance of antioxidant activity, the antioxidant extract was enriched by liquid-liquid extraction. The partition coefficients of the two main components in antioxidant extracts differed greatly, so in this study, elution-extrusion counter-current chromatography with the solvent system of n-hexane-ethyl acetate-methanol-water (2.5:5:2.5:5, v/v) was used to enhance the separation efficiency, and the two main components were successfully obtained. Among them, kaempferol showed strong antioxidant activity, which can be responsible for the activity of the extract. In order to deeply understand the antioxidant mechanism of kaempferol, the thermodynamics, frontier molecular orbital, and kinetics of scavenging free radicals were investigated by density functional theory. The results showed that 4′-OH in kaempferol was the most active group, which can scavenge free radicals by hydrogen atom transfer in non-polar solvents and activate 3-OH to generate double hydrogen atom transfer in the gas phase. But in polar solvents, it was more inclined to clear radicals through single electron transfer and proton transfer. The kinetic result showed that kaempferol needed 9.17 kcal/mol of activation energy to scavenge free radicals.     

Identification and quality evaluation of different processed products of Aconitum carmichaelii by ultra-high-performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry and ultra-high-performance liquid chromatography-tandem mass spectrometry

Aconitum carmichaelii is widely used to treat chronic and intractable diseases due to its remarkable curative effect, but it is also a highly toxic herb with severe cardiac and neurotoxicity. It has been combined with honey for thousands of years to reduce toxicity and enhance efficacy, but there has been no study on the chemical constituent changes in the honey-processing so far. In this study, the chemical constituents of A. carmichaelii before and after honey-processing were characterized by ultra-high-performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry. The results showed that a total of 118 compounds were identified, of which six compounds disappeared and five compounds were newly produced after honey-processing, and the cleavage pathway of main components was elucidated. At the same time, 25 compounds were found to have significant effects on different products, among which four compounds with the biggest difference were selected for quantitative analysis by ultra-high-performance liquid chromatography-tandem mass spectrometry. This study not only explained the chemical differences between the different products, but also helped to control the quality of the honey-processed products more effectively, and laid a foundation for further elucidating the mechanism of chemical constituent change during the honey-processing of A. carmichaelii.